Tas-Sellum Residence
HomeApartmentsMaltaBuying Property in MaltaNewsDownloadsContact

Further details
Special Designated Area
Development Features
Standard Common Areas Specifications (B1)
Standard Apartment Specifications (B2)

Standard Apartment Specifications (B2)

For 3 Bedroom Apartments

SERVICES

· Plumbing
Hot and cold plumbing installation to bathrooms, shower rooms and kitchen as indicated in plan.
· Electrical
Power and lighting installation to all rooms and power points for the eventual installation of air conditioning units, main switch and circuit breaker, will be installed as indicated in architectural drawing attached to contract. Maximum 35 power points, 30 lighting points, cooker and shaver units. A separate power point will be installed in all rooms for eventual installation by purchaser of an indoor air conditioning unit. A further power point will also be installed from the apartment up to the basement for the air- conditioning outdoor unit. (See further details under air-conditioning).
· Bathrooms : Sanitary ware in bathroom as indicated in plans.
· Drainage : Drainage system to bathrooms, shower rooms and kitchen installed down to ground level and connected to government mains.
· Telephone : Up to 5 telephone outlets installed as indicated in plans. Wiring to be carried out by service provider on request by buyer.
· TV : Up to 4 television outlets installation as indicated in plans. Wiring to be carried out by service provider on request by buyer.
· Intercom : Intercom in hall to main entrance and resident’s car park level, including automatic lock to same.
· Air-Conditioning : The air conditioning system shall be purchased and installed by the buyer. The type of system installed shall consist of a single outdoor unit serving a number of the indoor units in each apartment. The outdoor unit shall be installed in the space provided by the vendor in the basement. No other space shall be made available for the installation of the outdoor unit.
The vendor shall provide the necessary electrical points in the apartment and in the basement for the eventual connection of the air conditioning system indoor and outdoor unit, by the purchaser. Before installing any equipment, the buyer shall submit to the vendor, full details of the equipment it is intended to install. The buyer will be allowed to install the equipment only if the system satisfies the vendor that it shall not cause any disturbance to the surrounding neighbors and will fit in the space available.

APERTURES

· Apartment main door
Solid door in wood complete with box frame and architrave, door fittings and three-point door lock.
· External Door to block
Refer to ‘Common Areas Specifications’
· Internal Doors
Natural wood flush doors.
· External Apertures
Anodised aluminium with double glazing were specified.
· Terrace/balcony handrails
Pultruded corrosion resistant structural fiberglass or galvanized wrought iron
railings to balconies and terraces.

FLOOR FINISHES

· All rooms except bathrooms and shower rooms
Ceramic floor tiles 450mm by 450mm or similar.
· Bathrooms & shower rooms
Ceramic floor tiles 200mm by 200mm or similar.
· Terraces
Ceramic floor tiles and skirting. (Standard to all terraces)
· Skirting
Ceramic to match floor tiles

WALLS AND CEILING FINISHES

· Walls (To rooms except bathrooms and shower rooms)
Gypsum finish and two coats of plastic emulsion paint.
· Ceilings
Gypsum finish and two coats of plastic emulsion paint.
· Walls to bathrooms and shower rooms
· 200mm by 200mm or similar ceramic tiles, floor to ceiling.
· Door & Window sills
White Carrara marble
· Parapet walls
Rendered finish.
· False ceiling: in bathroom and corridor.